That's right-exhaust machines STALKER GTQ10A, GT4-14CG, SGT5, etc.

THE EQUIPMENT HAS BEEN DISCONTINUED. ASK FOR THE SELECTION OF AN ANALOG.

• The GtQ10A right-cutting machine is designed for straightening reinforcing rods with a diameter of 3-10 mm. The machine is capable of straightening reinforcing bars with various technical characteristics by turning the adjusting screw on a rotating device. The straightened reinforcing rods come out automatically during the rotation of the machine. The speed of editing varies depending on the diameter of the reinforcing bar. The machine sets the rotation along the curve for straightening the reinforcing bars without violating the strength of the reinforcing bar.
• GTQ10A is correct-exhaust machines. Technical data

• The machine for straightening and cutting reinforcing bars with hydraulic drive type GT 4-14 CG is mainly used for straightening and dimensional cutting of cold-rolled ribbed reinforcing bars, hot-rolled reinforcing steel of class III, cold-rolled smooth reinforcing bars, as well as hot-rolled steel wire for construction purposes.
• The machine has a high degree of automation and high pulling speed, operates in continuous mode, is equipped with an automatic counting device and a braking device, has excellent safety characteristics.
• The steel wire straightened by means of the machine has no scratches on the surface, has a minimal loss of strength and a high degree of straightness. In addition, the design provides ease of operation, ease of management, simplicity in the supply of materials and high production efficiency.
• GT4-14CG Correctly-exhaust machines. Technical data

• Correct-the Stalker SGT 5-14 EG cutting machine is designed for straightening and cutting rebar with a diameter of up to 14 mm. A high degree of automation and a fast speed of armature broaching allows you to quickly and easily obtain straight bars of the required length. After editing, the strength of the material is not lost. Small dimensions and weight make it easy to move the machine to the desired location.
• SGT5-14EG Correct-exhaust machines. Technical data

• Correct-the Stalker SGT 5-12 cutting machine is designed for straightening and cutting rebar with a diameter of up to 12 mm. A high degree of automation and a fast speed of armature broaching allows you to quickly and easily obtain straight bars of the required length. After editing, the strength of the material is not lost. Small dimensions and weight make it easy to move the machine to the desired location.
• SGT5-12 Correctly-exhaust machines. Technical data

Price list